Differences

This shows you the differences between two versions of the page.

--- report [2024/06/25 12:20] – team3
+++ report [2024/06/25 16:50] (current) – [7.5 Prototype] team3
@@ Line 2998: / Line 2998: @@
 ==== - Prototype ====
-This chapter focuses on the creation of the product prototype, a crucial milestone in the development of the ArtSy(nc) project. The realisation of the prototype allowed for the exploration and validation of concepts, the testing of intended functionalities, and the identification of necessary improvements before the production of the final product.
+This chapter focuses on the creation of the product prototype. This chapter delves in the realisation of the prototype allowed for the exploration and validation of concepts, the testing of intended functionalities, and the identification of necessary improvements before the production of the final product.
-The prototyping process began with an in-depth design phase, during which ideas and requirements were transformed into a tangible model. Each step of this phase, from material selection to component assembly, was guided by the objectives of sustainability and performance.
+The prototyping process starts with an in-depth design phase, during which ideas and requirements get transformed into a tangible model. Each step of this phase, from material selection to component assembly, guided by the objectives of sustainability and performance.
-The techniques and tools used to manufacture the prototype will be detailed, along with the challenges encountered and the solutions implemented to overcome them. This iterative approach enabled refinement of the product by integrating feedback and adjusting technical and aesthetic elements.
+The techniques and tools to manufacture the prototype will be detailed, along with the challenges encountered and the solutions implemented to overcome them. This iterative approach enables refinement of the product by integrating feedback and adjusting technical and aesthetic elements.
 Finally, this chapter will highlight the differences between the prototype and the final product. Adjustments made are based on performance tests and feedback obtained during the prototyping phase. These changes include improvements in material selection, simplification of manufacturing processes, and optimisation of functionalities to better meet user needs.